• 联系电话
    0755-23570801
  • 电子邮箱
    sales@realphoton.com
  • 公司地址
    广东省深圳市
  • Emcore / Neophotonics  TTX1995 系列 ITLA 波长可调激光器 50GHz间隔 C波段

Emcore / Neophotonics TTX1995 系列 ITLA 波长可调激光器 50GHz间隔 C波段

该高性能波长可调激光器组件, 波长覆盖C或L波段的ITU Grid. 基于OIF Micro-iTLA标准, 该组件电路板上集成了激光和控制元件, 通过RS232协议接口可对激光器的波长调谐, 光功率可变等工作状态及参数进行设置. 具有高达20mW/40mW连续光输出, 20kHz极窄典型瞬时线宽, 低强度噪声, 高边模抑制比, 高波长稳定性及功率稳定性, 可提供配套驱动控制模块.

产品详情

EMCORE安科 (现为 Neophotonics ) TTX1995 系列 ITLA 波长可调激光器, 该高性能波长可调激光器组件, 波长覆盖C或L波段的ITU Grid. 基于OIF Micro-iTLA标准, 该组件电路板上集成了激光和控制元件, 通过RS232协议接口可对激光器的波长调谐, 光功率可变等工作状态及参数进行设置. 具有高达20mW/40mW连续光输出, 20kHz极窄典型瞬时线宽, 低强度噪声, 高边模抑制比, 高波长稳定性及功率稳定性, 紧凑型超小尺寸组件封装. 非常适合作为40G/100Gbpcs的长距离高速相干光纤通信系统的光源, 以及C波段的DWDM光无源器件和光电探测器的测试及测量. 可提供配套驱动控制模块.

Micro Tunable Lasers, ITU DWDM Grid, C Band, Emcore/Neophotonics TTX1995 uITLA, Micro Integrable Tunable Laser Assembly

Introduction

The EMCORE (Now Neophotonics) TTX1995 micro-ITLA (Integrable Tunable Laser Assembly) delivers the performance of Emcore’s ITLA product in an ultra-small form-factor. Emcore’s tunable laser technology is based on an External Cavity Laser (ECL) design, delivering industry-best performance on frequency control, optical noise, output power, power consumption and frequency accuracy. The ECL uses thermally tuned etalon filters to achieve single-mode operation at selectable wavelengths. The EMCORE tunable laser has no moving parts and has a field-proven track-record of several billion field-hours.

The EMCORE TTX1995 micro-ITLA is an ideal source for high speed data rates (100Gbps and beyond) with an extremely narrow linewidth (~20kHz), low Relative Intensity Noise (RIN, <-140dB/Hz), a high Side-Mode Suppression Ratio (SMSR, >45dB), and excellent frequency accuracy. In addition, available features include off-grid tuning, adjustable grid-spacing and ‘in-operation’ adjustable transmit output power.

The tunable assembly has a typical power dissipation of 2.0W, with an end-of-life maximum of 3.0W. In addition, the laser can be used for more traditional applications in high-channel count DWDM systems, such as inventory, sparing, hot back-up, dynamic provisioning and optical regeneration.

The EMCORE TTX1995 micro-ITLA allows full control and monitoring through an RS-232 serial interface. For health monitoring, fault detection, and intervention designs, the EMCORE TTX1995 micro-ITLA implements a full set of monitors and alarms.

Product Overview

Leveraging EMCORE’s field-proven External Cavity Laser (ECL) technology in an ultra-small form factor, the micro-ITLA represents a dramatic next step in CW-tunable laser technology. It delivers ITLA compliant performance, EMCORE’s ‘Best Light in the Business’ and low power consumption, all in footprint of 20mm x 37mm x 7.5mm.

TTX1995 micro-ITLA delivers the high-end performance required for next-generation optical

systems to enable 40Gbps and 100Gbps coherent transmission links, thanks to a narrow linewidth and noise performance. In addition, performance options such as high output power (15.5dBm) and superior frequency accuracy over life are available.

Ever-increasing bandwidth demand continues to push line-side DWDM components closer to the network edge, making cost-effective, high-density tunable optics a critical enabler. The EMCORE micro-ITLA allows customers to drastically improve density and cost, without sacrificing quality.

Product Features

  • Full C-band or L-band tuning
  • Grid agnostic, tune to any grid, any frequency
  • Best light in the business

– Narrow linewidth (typical 20kHz)

– High SMSR (typical 45dB)

– Low intensity noise (<-145dB/Hz)

  • ±2.5GHz freq. accuracy
  • LxWxH: 20 x 37 x 7.5 mm3
  • Advanced features

– In-operation Frequency Adjust (±6GHz)

– In-operation Power Adjust (6dB)

– Digital diagnostics

ParametersC-bandL-band
Wavelength Tunable
Range (nm)
1528 to 15681570 to 1608
Frequency Range (THz)191.5 to 196.25186.2 to 190.5
Wavelength Channel
Number (CHs)
>=96>=92
Power Output
Range (mW)
5~20 or 5~40
Linewidth (Hz)< 100K, Typ.20KHz
Polarization
Extinction Ratio (dB)
> 20
SMSR (dB)> 40
Relative Intensity Noise
RIN(dB/Hz)
<-140
Wavelength Spacing50GHz Spacing
Wavelength Stability±1pm(15min)
±3pm(8hour)
Warm-up time (s)30
Fiber pigtailPM1550
Output connectorFC/PC or FC/APC, etc

Note: The specification is subject to change without notice.