DESCRIPTION The balanced receiver module is ideally suited for a variety of applications up to 43 Gbps such as D/BPSK, D/QPSK and . The module consists of a pair of balanced photodiodes and a high-gain limiting transimpedance amplifier. The module has a typical conversion gain of 2400 V/W. Its dynamic […]

40Gbps Balanced Photo-Diode Receiver Module, C, L & O band


20180408_181413 - Copy
DESCRIPTION The Module is a photodiode module designed for RF over Fiber, and broadband RF transmission or digital telecommunication using single mode optical fiber. The module utilizes a high input power, low distortion PIN photodiode that provides optical to RF conversion out to the frequency range beyond 40 GHz. This […]

40~10GHz Photo-diode Module, Analog PIN Receiver, C, L & O ...


20180408_181939 - Copy
DESCRIPTION The modulator integrated DFB module consists of electro-absorption modulator and conventional Distributed Feed-Back (DFB) laser. The modulation signal is applied to the modulator section while the laser section operates CW allowing extremely low wavelength chirping. The module includes an optical isolator, monitor photodiode, thermistor and a thermo-electric cooler. FEATURES […]

40G~10Gbps Electro-Absorption Modulated Laser Module, EAM-DFB Laser


20180103_170309
DESCRIPTION The high speed photo-receiver receiver evaluation board consist of the key module,  MPRV133xA, which is a differential front-end with high differential gain and a typical bandwidth of 36GHz.The photo-receiver module contains  waveguide-integrated PIN photodiode (PD) and a single chip and limiting amplifier (LA) with limiting output buffer. The incorporated […]

40Gbps U2T/Finisar Photoreceiver / Photodetector Evaluation Board O, C/L Band



EDFA - Bench-top
DESCRIPTION The Pump laser source adopts the butterfly packaged LD with wavelength-stabilized FBG to achieve the stable wavelength and output power.  And It also offers a special protection against optical damage caused by ASE return. The keys and display integrated in the front panel make it very easy of use […]

Pump Laser Source, 974/976nm, Bench-top or Module


Pump
DESCRIPTION The pump laser driver consists of three sections: LD bias, back PD current monitor and temperature stabilizer. It is suited for 10-pin or 14-pin butterfly packaged pump laser or equivalent. A 4.3-inch touch screen make it very easy of use for green hand, and the RS232 serial comm. port […]

Butterfly Packaged Pump Driver, Touch Screen, Power and TEC Tunable


EDFA - Bench-top
DESCRIPTION The EDFA adopts unique design to produce maximum signal gain and saturated output power while maintaining low noise figure, enabling test capabilities in system or component level manufacturing and characterization, as well as facilitating highly demanding R&D applications. The turnkey bench-top unit incorporates an user-friendly front panel housing with […]

Erbium-Doped Fiber Amplifier, EDFA, Flatten Gain, Bench-top or Module


LAN-WDM
DESCRIPTION The LAN-WDM Laser source consists of four wavelengths: 1295.56, 1300.05, 1304.58, and 1309.14 nm. Wavelength is temperature stabilized. The DFB LAN-WDM Laser source assists in the development and manufacturing of active or passive LAN WDM devices for LR and ER interconnect transmission using PAM4 for 100 Gigabit Ethernet (GbE), […]

LAN WDM Laser Source, 1295/1300/1304/1309nm, DFB



BPRV212xA-2
DESCRIPTION The balanced photo-receiver receiver evaluation board consist of the key module,  BPRV212x(A), which is a differential front-end for 43Gbits/s DPSK-applications featuring high differential gain. The photo-receiver module contains two waveguide-integrated PIN photodiode (PD) and a single chip and limiting amplifier (LA) within one small form factor SMD-package. The Receiver […]

Balanced Photo-Diode Receiver Evaluation Board, C&L band, 40Gbps


AT10GC-SMA
DESCRIPTION The Avalanche Photo-Diode Receiver Evaluation Board consists of a key avalanche photo-receiver, AT10GC, which integrate a low-noise preamplifier and a precision NTC thermistor in a hermetic coplanar package. Differential outputs are provided to improve noise rejection for enhanced sensitivity. It has been optimized for use in 10Gb/s metro applications, […]

APD Receiver Evaluation Board, Avalanche Photo-Diode, C&L Band, 10Gbps


EAM Laser Transmitter-1
DESCRIPTION The EML (Electro-absorption Modulated  Laser) transmitter evaluation board consists of a conventional Distributed Feed-Back (DFB) laser and EA modulator. The modulation signal is applied to the modulator section while the laser section operates CW allowing extremely low wavelength chirping. The module includes an optical isolator, monitor photodiode, thermistor and […]

EML Optical Transmitter, 10G/40Gbps Electro-absorption Modulated Laser


MZM Transmitter Evaluation Board
DESCRIPTION The optical MZM (Mach-Zehnder Modulator) transmitter is a high performance modulation evaluation unit that allows user to produce optical signals with complex modulation schemes (NRZ, OOK, BPSK, DPSK). It integrates high bandwidth optical capable of dealing with data rate up to 40 Gbps. It features an embedded bias controller […]

NRZ/OOK/BPSK/DPSK Transmitter Evaluation Board, MZ Modulated Transmitter



ftm7960ex-overview
This optical modulator is a Ti:LiNbO3 IQ/QAM Dual-Drive Mach-Zehnder modulator with modulation speed of up to 22.5Gbaud. Features Low Drive Voltage, RF VπVoltage [email protected], Typ. 40Gbps(22GBaud) Mach-Zehnder Modulator Using Ti-diffused LiNbO3 Waveguide Technology for QPSK/QAM Transmission Format. Separated DC Bias Port, Built-in Monitor Photodiode for Auto Bias Control Low Insertion […]

40Gbps IQ/QAM Modulator, Fujitsu FTM7960EX, Dual Drive QPSK Modulator


dsc40s-overview
These high speed photodiodes are hermetically sealed, high reliability, low harmonic distortion photodiode modules designed for high optical power applications with typical bandwidths of 16GHz, respectively. The devices are well suited for receiver applications with optical pre-amplification, and are available with an internal 50 Ω termination. These photodiode modules are […]

14Ghz Analog PIN Photo-Detector, Discovery DSC40S, High Power Low Distortion


idrv2242a-overview
The integrated DPSK receiver module IDRV consists of a balanced photoreceiver and an integrated delay-line interferometer (DLI). The IDRV is a differential front-end for 43 Gbit/s DPSK-applications featuring high differential gain of typically 1500 V/W. The two output ports of a phase-tunable DLI are coupled into two single chip waveguide-integrated […]

43Gbps Integrated DPSK Receiver, U2T IDRV2242A, Delay Line Interferometer Integrated


t-sbzh1-5-20pd-adc-sumitomo-resize
40Gbps DQPSK Modulator, Sumitomo T.SBZH1.5-20PD-ADC, Dual Drive IQ Modulator This optical modulator is a DQPSK Dual-Drive( Quad GPPO) Mach-Zehnder modulator with modulation speed of up to 22.5Gbaud. The structure of dual drive MZ interferometers enables exact phase match or arbitrary phase difference control, which make it ideal for some novel […]

40Gbps DQPSK Modulator, Sumitomo T.SBZH1.5-20PD-ADC, Dual Drive IQ Modulator



lim400-resize
40Gbps Transmitter, Cyoptics LIM400, Electro-absorption Modulated Laser, Integrated EML Module The CyOptics (formerly Apogee Photonics, now Broadcom Limited) LIM400 Laser-Integrated Module is a compact, high-performance device used in 40Gb/s long-reach data transmission. The LIM400 enables ITU and MSA compliance with a dispersion penalty of less than 1dB over 40ps/nm of […]

40Gbps EML Module, Cyoptics LIM400, Electro-absorption Modulated Laser


at10gc-overview
10Gbps APD Preamp Receiver, Bookham (Oclaro) AT10GC, Fiber Coupled Photo-Detector The AT10GC receiver consists of an avalanche photodiode, a low-noise preamplifier and a precision NTC thermistor in a hermetic coplanar package with a connectorized single-mode fiber pigtail. Differential outputs are provided to improve noise rejection for enhanced sensitivity. It has […]

10Gbps APD Preamp Receiver, Bookham (Oclaro) AT10GC, Fiber Coupled Photo-Detector


memsvoa-overview
Product Description OptiMems’ MEMS Variable Optical Attenuator uses an electrostatic tilting morror to change light coupling between input and output fibers. Key fatures include low IL, fast response and compact size. MEMS VOA is available in dark or bright type. Applications include power equalization before optical amplification in multi-channel WDM […]

OPTIMEMS 1060 1310 1550 1600nm SM/PM MEMS VOA Variable Optical ...