四输入铌酸锂线性驱动器, 射频放大器; 输入为Co-plannar Pin引脚, 输出标准GPPO射频连接头, 每通道典型符号率25Gbaud, 支持市面上常见100G/200G铌酸锂调制器的驱动. 3V~6V线性范围输出,支持QPSK和16QAM调制类型. 功耗低于8W, 增益高达21dB.
The MAOM-003414 is a high performance optical modulator driver for 100G and 200G applications requiring linear amplification. It integrates 4 identical driver channels in a high performance package with differential surface mount co-planar inputs and single-ended GPPO outputs for direct connection to an OIF compliant LiNbO modulator.
Each channel has linear gain which can be adjusted with analog control from 12 dB to 19 dB with a differential input voltage up to 1000 mVpp. Excellent THD performance is maintained across the output voltage range of 3 Vpp to 5 Vpp. The output voltage can be maintained constant using the integrated, temperature compensated, peak detectors in a closed-loop control circuit. Typical power consumption is 7.7 W while crosstalk and skew are minimized for optimum system performance.
Block Diagram and Eye Diagram at 32.5Gbps
100G DP-QPSK Transponders and Line cards
200G DP-QAM systems
Other applications requiring Lithium Niobate optical modulators
Supports data-rates up to 32.5 Gbps
Linear output voltage range from 3 Vpp to 6 Vpp
Linear gain range from 12 dB to 19 dB
Integrated peak detectors and temperature sensor diodes
Typical THD of 4%
Power consumption of 1.9 W per channel
High performance package with surface mount inputs and GPPO outputs
Integrates all bias chokes, coupling and decoupling capacitors
Package size 27 mm x 29 mm x 6.4 mm